Watchguard V2 Spécifications télécharger pdf (Page 20)

The detector is not waterproof and is designed for indoor use only.

1. Firstly, the mounting bracket must be fixed to the wall

using the self-tapping screw. Mounting should be at a

minimum height of 1.2 metres and maximum of 2.1

metres.

2. Drill a 5mm diameter hole (at least 30mm deep) into

the wall for mounting the detector bracket/socket

base.

3. Push the wall plug into the hole then screw in the

mounting bracket. It will clip into the base.

4. The detector can now be clipped onto the swivel

bracket. See diagram below.

Approx mounting angle at

2.1m

Figure 1

Ensure PIR sensor does not face window

PIR Sensor – Mount at a height of

Between 1.2m and 1.8m from ground

Locate PIR sensor on a diagonal to doorway

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 55 56

Pas de commentaire

Watchguard V2 Spécifications Page 20